Polycarbonat Ventilated Tape 1"W x 82'L

Polycarbonate Breather Tape 1"Wx82'L Seal Twin Wall Roof Panel Sheet.

Ventilated and self-adhesive!

High performance 1' 'breathable' self-adhesive filter tape protects against ingress of dust, debris and insects in flutes of 4-10mm multiwall polycarbonate sheeting.

When used as an anti-dust tape on the open ends of polycarbonate conservatory roof panels, Filtarite provides a clean breathable filter that also allows the escape of water vapour to prevent condensation.

1. Prepare the polycarbonate sheetClean the end of the sheet where you will fit the tape. This is a good time to remove dirt or moisture from the flutes, which are the channels that run the length of the sheet. Ensure that the surface is clean and dry before...

2. Positioning tape over endCut 50mm longer than the width of the sheet, to allow 25mm to wrap round both corners. Stick the pre-cut tape to the end of your sheet. Position vertically so that some tape rises above and an equal amount hangs below the end of the sheet. Then...

3. Fold tape over to secureFold the overhanging strips of tape to the top and bottom face of the sheeting. Don?t worry if the tape is a little longer than your sheet, you can just fold it round the end to...

4. Fit End ClosureFit a protective end closure over the sheet to prevent it from being harmed by the elements.